Scratch and dent sale
$ 49.00
Regular price $ 31.85These products have paint or powder coating related issues or damages from shipping, being used as displays or returns. These products have no structural problems and will perform as well as any of our new in stock items.
You can use them as they are or easily refinish them by lightly sanding and painting them in the color of your choice.
All scratch and dent sales include hardware packs. (...and sticker kits for Dan pedal hook only)
The product descriptions are the same as for our new in stock items.
Dan Pedal Hook:
The Dan pedal hook is a horizontal bike storage system. Dan holds the bikes at a 25 degree angle from the wall, allowing for staggered installation. You can hang up to three bikes on an 8 foot tall wall. (one pedal hook per bike needed) This is by far the most space saving solution when it comes to floor space and square footage. Dan comes with a fun sticker sheet including a KOM jersey and two sets of googly eyes stickers which conceal two of the four screws. Made in the USA - laser cut, bend and powder coated steel. (11ga) Holds up to 65lbs. Works with all pedals, including Speedplay and Eggbeaters. For bikes with a bar width up to 34" or 863mm and pedals up to 5" (127mm) wide. Each set includes one pedal hook, two wheel shelves, hardware kit and sticker kit.
Pedals that don't fit: (Powertap P1, Syntace No.9, oneUp, Kona Wah Wah and RaceFace Atlas, One Up components pedals will not fit in the gap by 2mm. You can file open the gap to make it work) or get the DaBigRing with a large gap instead.
Sprocket Pedal Hook:
The SPROCKET pedal hook is a horizontal bike storage system that holds the bikes at a 20 degree angle. Perfect for narrow hallways or when storing two bikes on top of each other. Available in black or white powder coat (felt pad included) or Stainless Steel (with felt pad installed). Holds up to 40 lbs. Works with all pedals, including Speedplay and Eggbeaters. Made in the USA - laser cut, bend and powder coated steel. (11ga) or stainless steel. Additional colored felt pads available. For bikes with a bar width up to 28" or 711mm and pedals up to 3" (76mm) wide.
Includes everything needed for installation: One pedal hook, two wheel shelves, hardware pack, felt pad
Pedals that don't fit: (Powertap P1, Syntace No.9, Kona Wah Wah and RaceFace Atlas will not fit in the gap by 2mm. You can file open the gap to make it work) or get the BigRing with a large gap instead.
These products have paint or powder coating related issues or damages from shipping, being used as displays or returns. These products have no structural problems and will perform as well as any of our new in stock items.
You can use them as they are or easily refinish them by lightly sanding and painting them in the color of your choice.
All scratch and dent sales include hardware packs. (...and sticker kits for Dan pedal hook only)
The product descriptions are the same as for our new in stock items.
Dan Pedal Hook:
The Dan pedal hook is a horizontal bike storage system. Dan holds the bikes at a 25 degree angle from the wall, allowing for staggered installation. You can hang up to three bikes on an 8 foot tall wall. (one pedal hook per bike needed) This is by far the most space saving solution when it comes to floor space and square footage. Dan comes with a fun sticker sheet including a KOM jersey and two sets of googly eyes stickers which conceal two of the four screws. Made in the USA - laser cut, bend and powder coated steel. (11ga) Holds up to 65lbs. Works with all pedals, including Speedplay and Eggbeaters. For bikes with a bar width up to 34" or 863mm and pedals up to 5" (127mm) wide. Each set includes one pedal hook, two wheel shelves, hardware kit and sticker kit.
Pedals that don't fit: (Powertap P1, Syntace No.9, oneUp, Kona Wah Wah and RaceFace Atlas, One Up components pedals will not fit in the gap by 2mm. You can file open the gap to make it work) or get the DaBigRing with a large gap instead.
Sprocket Pedal Hook:
The SPROCKET pedal hook is a horizontal bike storage system that holds the bikes at a 20 degree angle. Perfect for narrow hallways or when storing two bikes on top of each other. Available in black or white powder coat (felt pad included) or Stainless Steel (with felt pad installed). Holds up to 40 lbs. Works with all pedals, including Speedplay and Eggbeaters. Made in the USA - laser cut, bend and powder coated steel. (11ga) or stainless steel. Additional colored felt pads available. For bikes with a bar width up to 28" or 711mm and pedals up to 3" (76mm) wide.
Includes everything needed for installation: One pedal hook, two wheel shelves, hardware pack, felt pad
Pedals that don't fit: (Powertap P1, Syntace No.9, Kona Wah Wah and RaceFace Atlas will not fit in the gap by 2mm. You can file open the gap to make it work) or get the BigRing with a large gap instead.
Scratch and dent sale
$ 49.00
Regular price $ 31.85These products have paint or powder coating related issues or damages from shipping, being used as displays or returns. These products have no structural problems and will perform as well as any of our new in stock items.
You can use them as they are or easily refinish them by lightly sanding and painting them in the color of your choice.
All scratch and dent sales include hardware packs. (...and sticker kits for Dan pedal hook only)
The product descriptions are the same as for our new in stock items.
Dan Pedal Hook:
The Dan pedal hook is a horizontal bike storage system. Dan holds the bikes at a 25 degree angle from the wall, allowing for staggered installation. You can hang up to three bikes on an 8 foot tall wall. (one pedal hook per bike needed) This is by far the most space saving solution when it comes to floor space and square footage. Dan comes with a fun sticker sheet including a KOM jersey and two sets of googly eyes stickers which conceal two of the four screws. Made in the USA - laser cut, bend and powder coated steel. (11ga) Holds up to 65lbs. Works with all pedals, including Speedplay and Eggbeaters. For bikes with a bar width up to 34" or 863mm and pedals up to 5" (127mm) wide. Each set includes one pedal hook, two wheel shelves, hardware kit and sticker kit.
Pedals that don't fit: (Powertap P1, Syntace No.9, oneUp, Kona Wah Wah and RaceFace Atlas, One Up components pedals will not fit in the gap by 2mm. You can file open the gap to make it work) or get the DaBigRing with a large gap instead.
Sprocket Pedal Hook:
The SPROCKET pedal hook is a horizontal bike storage system that holds the bikes at a 20 degree angle. Perfect for narrow hallways or when storing two bikes on top of each other. Available in black or white powder coat (felt pad included) or Stainless Steel (with felt pad installed). Holds up to 40 lbs. Works with all pedals, including Speedplay and Eggbeaters. Made in the USA - laser cut, bend and powder coated steel. (11ga) or stainless steel. Additional colored felt pads available. For bikes with a bar width up to 28" or 711mm and pedals up to 3" (76mm) wide.
Includes everything needed for installation: One pedal hook, two wheel shelves, hardware pack, felt pad
Pedals that don't fit: (Powertap P1, Syntace No.9, Kona Wah Wah and RaceFace Atlas will not fit in the gap by 2mm. You can file open the gap to make it work) or get the BigRing with a large gap instead.
These products have paint or powder coating related issues or damages from shipping, being used as displays or returns. These products have no structural problems and will perform as well as any of our new in stock items.
You can use them as they are or easily refinish them by lightly sanding and painting them in the color of your choice.
All scratch and dent sales include hardware packs. (...and sticker kits for Dan pedal hook only)
The product descriptions are the same as for our new in stock items.
Dan Pedal Hook:
The Dan pedal hook is a horizontal bike storage system. Dan holds the bikes at a 25 degree angle from the wall, allowing for staggered installation. You can hang up to three bikes on an 8 foot tall wall. (one pedal hook per bike needed) This is by far the most space saving solution when it comes to floor space and square footage. Dan comes with a fun sticker sheet including a KOM jersey and two sets of googly eyes stickers which conceal two of the four screws. Made in the USA - laser cut, bend and powder coated steel. (11ga) Holds up to 65lbs. Works with all pedals, including Speedplay and Eggbeaters. For bikes with a bar width up to 34" or 863mm and pedals up to 5" (127mm) wide. Each set includes one pedal hook, two wheel shelves, hardware kit and sticker kit.
Pedals that don't fit: (Powertap P1, Syntace No.9, oneUp, Kona Wah Wah and RaceFace Atlas, One Up components pedals will not fit in the gap by 2mm. You can file open the gap to make it work) or get the DaBigRing with a large gap instead.
Sprocket Pedal Hook:
The SPROCKET pedal hook is a horizontal bike storage system that holds the bikes at a 20 degree angle. Perfect for narrow hallways or when storing two bikes on top of each other. Available in black or white powder coat (felt pad included) or Stainless Steel (with felt pad installed). Holds up to 40 lbs. Works with all pedals, including Speedplay and Eggbeaters. Made in the USA - laser cut, bend and powder coated steel. (11ga) or stainless steel. Additional colored felt pads available. For bikes with a bar width up to 28" or 711mm and pedals up to 3" (76mm) wide.
Includes everything needed for installation: One pedal hook, two wheel shelves, hardware pack, felt pad
Pedals that don't fit: (Powertap P1, Syntace No.9, Kona Wah Wah and RaceFace Atlas will not fit in the gap by 2mm. You can file open the gap to make it work) or get the BigRing with a large gap instead.