Modern indoor bike rack that looks great with or without bike. Combining sleek design with perfect function. Available in grey or black. Includes all the hardware and a black felt pad for added protection. Molded, HD-foam filed and flame polished Made in the USA. No more scratched frames or kinked cables by hanging your bike by the seat. (This product is designed for lighter bikes weighing up to 30lbs.)

Check out the "How is it made" video.

If this item is sold out/backordered, please head over to the DaHANGER preorder offer and secure your place in line for the next completed units. 

click here for installation template

Free shipping in the USA.

Adjustable Pedal Hook 

DaBigRing pedal hook is a horizontal bike storage system that holds the bike by the pedal with adjustable legs that have three settings. The 18, 25 or 30 degree angle allows you to put your bike is best position no matter the application.

Narrow hallways: you want to keep your bike as close to the wall as possible, adjust the legs in.

Multiple bikes: overlap and stager more bikes. Have the top bike be as close to the wall as possible (legs in) and fit the others below at 25 or 30 degree (legs out) allowing for more overlap and therefore saving wall space.

Super wide handlebars: MTB Enduro bikes or beach cruisers come with super wide bars but none of them will be too wide for DaBigRing.

Adjustable for different wheel bases

Not only are the legs adjustable, but the front wheel shelf and rear wheel plate are adjustable for a change in bike length. There are six different bolt stop locations that cover everything from BMX bike to 29er MTB. Why a rear wheel plate? In the last 8 years of making and selling pedal hook systems we have yet to come across a stock bike that is heavier in the rear (more weight behind the bottom bracket) than in the front. So unless you have some bike packing racks with bags permanently on your bike, the rear wheel plates will work and give you extra coverage to keep the wall free of tire marks.  

Two choices of toe gaps

Standard: 95% of pedals will fit in the standard toe gap (26mm) which was designed  to work with small to medium platform and clipless pedals from Shimano and Time all the way to Speedplay and Eggbeaters. 

Large: The newer style of platform pedals like the Syntace No.9, RaceFace Atlas and even some power meter pedals with encased external bearings needed a bigger gap. The large toe gap of 31mm will fit this new generation of pedals and we will keep improving on this if necessary. 

You can purchase the foot plate as an individual item if you need to change it in the future. Click here for single foot plate.

Material, color and finish

Made in the USA or Made in Germany (for the European market) laser cut 11 gauge steel, bend and powder coated available in flat black or turquoise. You can also add on a protective felt pad that will keep your pedal hook from scratching.

Holds up to 65 lbs. and includes everything needed for installation.

What's in the box: One (1) pedal hook assemble, one (1) wheel shelf, one (1) wheel plate and one (1) hardware pack 

How to install DaBigRing 

The Dan pedal hook is a horizontal bike storage system. Dan holds the bikes at a 25 degree angle from the wall, allowing for staggered installation. You can hang up to three bikes on an 8 foot tall wall. (one pedal hook per bike needed) This is by far the most space saving solution when it comes to floor space and square footage. Dan comes with a fun sticker sheet including a KOM jersey and two sets of googly eyes stickers which conceal two of the four screws. Made in the USA - laser cut, bend and powder coated steel. (11ga) Holds up to 70lbs. Works with all pedals, including Speedplay and Eggbeaters. For bikes with a bar width up to 34" or 863mm and pedals up to 5" (127mm) wide. Each set includes one pedal hook, two wheel shelves, hardware kit and sticker kit.

Add the Dan pants. (protective felt pad)

Pedals that don't fit: (Powertap P1, Syntace No.9, oneUp, Kona Wah Wah and RaceFace Atlas, One Up components pedals will not fit in the gap by 2mm. You can file open the gap to make it work) or get the DaBigRing with a large gap instead.

DaSPROCKET pedal hook is a horizontal bike storage system that holds the bikes at a 20 degree angle. Perfect for narrow hallways or when storing two bikes on top of each other. Available in black or white powder coat (with or without felt pad) or Stainless Steel (with felt pad installed). Holds up to 40 lbs. Works with all pedals, including Speedplay and Eggbeaters. Made in the USA - laser cut, bend and powder coated steel. (11ga) or stainless steel with colored felt pad. For bikes with a bar width up to 28" or 711mm and pedals up to 3" (76mm) wide.

Includes everything needed for installation: One pedal hook, two wheel shelves, hardware pack

Pedals that don't fit: (Powertap P1, Syntace No.9, Kona Wah Wah and RaceFace Atlas will not fit in the gap by 2mm. You can file open the gap to make it work) or get the DaBigRing with a large gap instead.